Current position :
Home > Products > Static eliminator

AP-AZ3201 Inductive Ionizing Air Snake

Specification
Maintenance
After sales service
Specification
 

Model

AP-AZ3201

Input Voltage

AC220V 50Hz or AC110V 60Hz

Power

26W

Working distance

150-300mm

Ion balance

≤|±50V|(150mm testing center from the air snake)

Discharge speed

≤1.5S(150mm testing center from the air snake)

Noise

<65db(150mm from the air outlet)

Medium used

clean pressed air

Air pressure rang

0.2 - 0.6MPa

Working temperature

0°C - 50°C

Air connector

ф8mm(customize available)

Dimension

180*135*118mm(L*W*H)(cabinet)

Net weight

3350g(including power cord, optoelectronic switch and clamp ring)

Gross weight

3780g

Maintenance
 Maintenance 

(1). To ensure that product performance is good, it is required to clean and maintenance the gun depending on their environment. Gently remove carbon deposits on the discharge electrode by use static brushes, dust-free cloth moistened with anhydrous alcohol can improve the performance significantly.

Caution

(A) Must be done 10 minutes after power switched off.

(B) When use anhydrous alcohol to clean. Power should be switched on after alcohol volatile completely. Any other organic solvents are not allowed to use for clean purpose.

(2). User should stop using the device when the red working instruction LED is off. It can only be reused after check and repair and the Performance indicators are confirmed.

After sales service
 After sales service 

(1) AP-AZ3201 ionizing air snakes are strictly inspected and match all the technical standards indicated in this manual.

(2) Repair or change any damaged parts caused by quality reasons free of charge within one year from the date of purchase after we confirm the quality issue.

(3) Above promise is not fit for the following situation:Alternation of the device, wrongly used, incorrect installation, abasement, negligence, accidental damage, wrong input voltage, unpacking and repacking by user itself or maintain by other unauthorized service department.

(4) AP&T is free from any related responsibility of using the product except the parts specified here above.

Accessories  

(1). Warranty card    (2). User manual    (3). Conformity card  (4). Cleaning brush

Inquiry
If you would like to contact us for more information about our products, please fill out the form below, thank you.
Your name (required):
Your E-mail (required):
Country:
Your phone number:
Your message: