AP-AB1206 AC Electroshock-proof Ion Bar

AP-AB1206 AC electroshock-proof ion bar is the bar shape static eliminator used to remove electrostatic on object surface.

AP - AB1206 AC electroshock-proof ion bar generates positive and negative ion on emitter by AC high voltage and transfer the ion by pressed air to the object surface to be static removed. Thus neutralize the ion on the object surface and eliminate static efficiently and reliably.

(1)Bar shaped and cross over static eliminator
(2)Compact structure and elegant appearance
(3)Fast discharge speed, low ion balance and high safety performance
(4)Abnormal high voltage alarm function
(5)Electroshock-proof function

Elimination Effect



Testing instrument ：3M-711 Static tester
Testing standard：ESD.STM3.1-2000；SJ/T 11446—2013
Testing voltage ：±1000 — ±100V Attenuation
Testing environment ：Humidity50±5% Temperature:23±3℃
Testing data as below(（Test distance: 300mm，Ion bar width:880mm，Airflow:0.3Mpa，Frequency:30Hz）：






Test standard：ANSI/ESD.STM3.1，ANSI/ESD.SP3.3，SJ/T 11446—2013
Test Device：Trek157 static detector
Test Voltage：±1000V → ±100V attenuation
Test environment：Humidity 50±5%；Temperature23±3℃

1.Installation guide

(1)Choose an optimal position and fix the ion bar and adaptor tightly.
(2)Connect two ends of power cable with adaptor and ion bar.
(3)Connect the ground end on the bar body to the ground bolt on the power
(4)Switch on the power and set proper parameters.

2.Outline dimensional drawing

3.Positioning

4.Remote Control

① On/Off ② Reduce duty ratio ③ Enlarge duty ratio ④ Frequency：2→1Hz，3→3Hz，4→5 Hz，5→8Hz，6→10Hz，7→20Hz，8→30Hz，9→50Hz